SC200/200 Construction Hoist FIC-12 Fully Intelligent Control
Passenger And Material Rack And Pinion Lift
Features and Advantages
* Equipped with Fully Intelligent System, with functions including floor
selection, floor calling and automatic cage landing/stop, automatic
open/close cage doors and floor doors, fault detect, display and
alarm, personnel biologic recognition and permissions, etc.
* Racks and Pinions are 8 Modulus, the most popular specification
which is convenient for users to maintain and replace.
* The modular and standardizing system makes the Kangbo
construction elevators be flexible, efficient and ownership cost.
* The material hoist runs without vibration or trembling. The man
and material lift starts and stops without surging or jerking.
* The passenger and elevator is reliable with very little breakdown
and is durable with very long work-life.
* Adopt energy-saving helical reducers made specially for rack and
pinion elevators, extremely strong, reliable and durable.
* Applying non-eccentric rollers, make the installation of
construction site elevators be faster and easier, with much less
error.
* The integrated elevator car roof, which made by a steel plate
with edges fully welded one time to complete, enhance hoist cage
strength and ensure no water leakage.
* The additional big size third door at the cage side let the users
to use fork trucks to load/unload extremely heavy and big size
materials.
* Easy access to electrical panels of elevator for maintenance.
* Certified safety braking system of rack and pinion hoist.
* The material elevator car frame is enlarged and strengthened.
* The elevators are equipped with full set of safety facilities,
including centrifugal brake, limit switches, Electromechanical
interlocks.
* Frequency control motors make the construction hoists starting
and stopping very smoothly, with low starting current and much less
wear and tear.
* Built-in electrical cabinet inside cage let the maintenance
personnels safe and comfortable to do their jobs.
* Modular design entry door and exit door, including vertical
sliding type and flap type, make the KANGBO passenger and material
hoists be flexible and applicable to various circumstance.
Technical Data
| Item & Article No. | SC200/200BZ, MP-B08 |
| Number of Cages | 2 Cages |
| Payload Capacity | 2,000 KG each Cage |
| Lifting Speed | 0–46 meter/minute, fully loaded |
| Max. Lifting Height | 250 m / 450 m * |
| Cage Size (internal) | 3.2(Length)*1.5(Width)*2.35(Height) Meter per Cage |
| Cage Doors | Modularized Entrance Door and Discharge Door, and Third Door at the
long side of cage |
| Engine Power | 2*15 KW each Cage; 2*2*15 KW Totally. |
| Motor Control | Frequency Control (FC) |
| Invertor Power (KW) | 1*37 KW each Cage; 2*37 KW Totally. |
| Gearbox | Helical Gearbox |
| Safety Device Type | Centrifugal Brake |
| Power Supply Range | 380–500 V, 50 or 60 Hz, 3 Phase |
| Mast Section | Square Column 650*650*1508 mm with Bolted Rack |
| Rack Module | 8 |
| * Increased lifting height on request. 250 m with step-up
transformer only. 400 m with step-up/step-down transformer. |